We are going to build this object out of brass and silver steel (all measures in millimeters):
(2.5mm stroke is ideal for male stimulation)
Let's start with the grocery list (all can be found online on Ebay or Amazon):
- 10mm diamater brass bar
- 2mm diameter silver steel bar (basically the shaft of a small DC motor, you can extract it from a motor or buy online).
- Epoxy glue.
- Insulated wire with a solid core of about 1.5 mm diameter (AWG 15)
- Stainless steel shaft sleeve for a 2mm shaft
- A few basic tools are also needed: plyers, an hacksaw, a grinding machine (or a file), a good soldering iron, 2mm and 10mm drill bits and a drill press (but you can get along with a regular drill and a steady hand).
Now it's time to drill the 2mm holes: one at the center all the way through the cilinder, the second one 2.5mm from the center just halfway through:
Next, glue the motor shaft into the center hole and a piece of the silver steel bar into the other hole, when the glue is cured cut the silver steel bar to about 10mm:
Last step is to take a piece of the insulated wire, strip the insulation on one end and with the help of some plyers create two loops: one to fit the silver steel rod to be kept in place with the shaft sleeve, the other one to fit your size...:
As a final touch add some hot glue as strain relief for the wires and wrap everything up with a shrink tube for a better grip and to protect the motor from sweat or any other fluid...
...and there you have it! A nice Cock Hero Machine!
Now, if you want to improve it, you can keep reading the next post:
Wireless Cock Hero Machine.
